What we’re going to accomplish

(Note that this includes a lot of explanation and exposition. You can skip down to the TL;DR version if you’d rather just see the results.)

In this example, we’re going to run through a very common use case and convert Markdown into HTML. The process to make a basic static site builder is pretty straightforward: We read markdown files from a source directory, convert them from markdown into HTML fragments, put those fragments into a page template, and then save the compiled HTML page(s) into a destination directory.

Keep in mind that the exact same process we’re going to create here could be altered to run nearly any file transformation we’d like. We could be converting LESS into CSS or taking SVG source files and running a few transformations to create slightly different SVG files. The Markdown to HTML example is just that: A single example.

Also note that there are two ways to run Metalsmith: with the API by creating a node script or through the CLI by creating a metalsmith.json configuration file. The end results are the same either way and it’s really a matter of preference. What we’re going to do here is run through the API approach first. Then, at the end, we’ll convert it into a CLI example that accomplishes the exact same thing. Normally, you just do whichever happens to work best with your comfort level and workflow.

The only requirement to follow along and run your own copy is that you have a recent version of Node installed. Aside from Node itself, our project is going to be completely self-contained and there’s nothing to uninstall or clean up afterward except the single directory with all our working files, dependencies, and the compiled results.

Setup

The files and folders that make up a project

First, we’ll need a project folder, which we’ll just call project. This will contain everything we need to run Metalsmith and create our HTML. In this folder, we’re going to make the following files:

a source directory, src/ by default, with our source Markdown-formatted content;
a layouts folder with a single Handlebars template; and
our node script to configure and run Metalsmith itself.

We’ll be using npm (Node’s built-in package manager) to install Metalsmith and two plugins to accomplish our two tasks: @metalsmith/markdown will convert our markdown files into HTML fragments while @metalsmith/layouts will put our HTML fragments into a Handlebars template. Handlebars is a choice for this particular example, rather than a requirement. You can use whatever templating engine you prefer.

The installation and build processes will create a few more items in our project folder, automatically adding them for us. In addition to those we’ve created above, we’ll eventually also have:

a package.json file and a package-lock.json file which npm uses to keep track of our project information;
a node_modules folder where npm installs Metalsmith and its plugins; and
a destination folder, called build/, where Metalsmith generates the results.

We’ll never actually touch or change any of those generated files directly. npm will create and update package.json and node_modules/ for us during the initial setup while the entire purpose of this example is to get Metalsmith to generate the build folder.

Getting started

Let’s open a command prompt and dive in. We’ll make a directory, cd into that directory, and tell npm to create a package.json file for us so we can install Metalsmith and its plugins.

mkdir project
cd project
npm init -y

npm init will normally ask you a few questions about what to call your project, versioning, licensing, etc. In this case, we’re using the -y flag, which just accepts all the defaults. You’ll end up with a package.json file that defines a project called “project” whose main file is index.js, which is the relevant info for this example. Now that we’ve initialized npm, we can use it to install Metalsmith and the plugins which we need for our project. Additionally, @metalsmith/layouts lets you define and install your choice of templating engine, so we’ll also install Handlebars as well.

npm install --save-dev metalsmith @metalsmith/markdown @metalsmith/layouts jstransformer-handlebars

That line tells npm to go fetch the current stable versions of our requirements, place them in the node_modules/ directory, and --save-dev saves references to these modules as development dependencies in the package.json file.

When initializing our project folder, npm init creates an entry point and the default is index.js. That’ll be our node script, so let’s create a blank file for now. We’ll also do the same for our template (which we’ll call layouts/default.hbs) and we’ll need to set up our source directory with at least one markdown file in it (let’s use the default src/ folder and add our single page as src/index.md).

touch index.js
mkdir layouts
touch layouts/default.hbs
mkdir src
touch src/index.md

Ok, that’s our setup and we have now:

installed our requirements with npm using package.json and node_modules/,
set up our script as index.js,
created our layouts/default.hbs template, and
made our first source file at src/index.md.

Keep in mind that this could all be prepared for you in advance with a little bit of project scaffolding - we’re just starting from scratch for the sake of this example. All we have to do now is create some content, create a template, and write the script itself.

The content

Creating HTML fragments using @metalsmith/markdown

Open up src/index.md in your editor of choice and let’s add some content. There are two parts to each source file: its YAML Frontmatter and its Markdown content. Frontmatter is used by Metalsmith by default. While you could override or replace it with plugins, if desired, we’re going to make use of it to set three properties of each page:

Setting the title of the page as title
Setting the description of the page, called description.
Telling @metalsmith/layouts to use our default.hbs template file, which @metalsmith/layouts calls layout.

Keep in mind that using markdown for your source files, while a popular use case and the point of our example, is just one of many options. The exact same series of steps could work for preprocessing different file types with a few different plugins. Additionally, note that, while the plugin we’re using for templating requires a property called layout to know which template to use, the title and description properties are completely arbitrary. We’re choosing to use those in our template, but they’re in no way required or defined by Metalsmith itself.

Here’s what that source file looks like as a result, with some lorem ipsum content and a sprinkling of markdown to see the conversion in action.

src/index.md

---
title: Example
description: This page is just an example.
layout: default.hbs
---

## Lorem ipsum

Dolor sit amet, consectetur __strong__ adipiscing elit. Morbi 
faucibus, *em* purus at gravida dictum, libero arcu convallis 
lacus, in commodo libero metus eu nisi. Nullam commodo, neque 
nec porta placerat, nisi est fermentum augue, vitae gravida 
[link](https://metalsmith.io) tellus sapien sit amet tellus. 
Aenean non diam orci. Proin quis elit turpis. Suspendisse non 
diam ipsum.

### Suspendisse nec ullamcorper odio.

- Vestibulum arcu mi, sodales non suscipit id.
- Sed ac sem sit amet arcu malesuada fermentum.
- Nunc sed.

That gives us the metadata properties and the content we’ll use in our template and some markdown to convert into an HTML fragment, leaving us ready to apply the layout. We’ve also got the layout property, which tells @metalsmith/layouts which template to apply from our layouts/ directory.

The template

Turning HTML fragments and metadata into complete HTML files

We’re not going to create anything particularly fancy with our layout. We will, however, be using a few variables in our template. These variables are the same metadata properties we created in our frontmatter, above. Here’s the code for a basic template:

layouts/default.hbs

<!doctype html>
<html lang="en">
<head>
    <meta charset="utf-8">
    <title>{{ title }}</title>
    <meta name="description" content="{{ description }}" />
</head>
<body>

    <h1>{{{ title }}}</h1>
    {{{ contents }}}

</body>
</html>

Note that we’re using 3 variables: title, description, and contents. While we defined title and description ourselves in our frontmatter, contents is where Metalsmith puts the contents of our source file.

Also note the double and triple braces. Double braces escape any HTML and result in plain text. The <title> element in the <head> can’t have other elements nested inside of it, so we’re just using double braces around title. By the time the contents variable gets to our template, on the other hand, it is a fragment of perfectly valid, usable HTML, so we drop it into our template as-is, using triple braces.

The script

Configuring Metalsmith to use our plugins

Metalsmith API usage generally follows a common pattern:

You require() Metalsmith and your plugins.
Start up Metalsmith and tell it where to run (which is almost always just __dirname, meaning the current directory).
You then .use() each of the plugins you need for your project, in order. This is where the proverbial magic happens.
Use Metalsmith’s .build() method to fire it all off and report any errors.

There are additional configuration options we could use and opportunities to add site-wide, global metadata if desired. For our purposes, we’re using default directory names and putting our metadata in our single source file, so our script is quite straightforward:

index.js

// Get our requirements, installed by npm
const Metalsmith  = require('metalsmith'),
    markdown    = require('@metalsmith/markdown'),
    layouts     = require('@metalsmith/layouts');

// Run Metalsmith in the current directory.
// When the .build() method runs, this reads
// and strips the frontmatter from each of our
// source files and passes it on to the plugins.
Metalsmith(__dirname)

    // Use @metalsmith/markdown to convert
    // our source files' content from markdown
    // to HTML fragments.
    .use(markdown())

    // Put the HTML fragments from the step above
    // into our template, using the Frontmatter
    // properties as template variables.
    .use(layouts())

    // And tell Metalsmith to fire it all off.
    .build(function(err, files) {
        if (err) { throw err; }
    });

There is a wide range of plugins that you could choose to .use() for any given project. For this example, however, that’s all we need. If you needed further processing done on the source files, you could just continue to chain further .use() methods to add additional plugins, in order, and ultimately ending with .build().

Save it and you can now tell Node to run your new script.

node index

With that, each markdown file in src is used to generate a corresponding html file in build using our content, metadata, and template. Do you hear that noise? That’s the sweet, sweet sound of success.

CLI usage

An alternate way to get the same results

The node script created above is an example of using the Metalsmith API and creating a code-based implementation. There’s a second example which works based upon configuration and convention. When you use the CLI approach, you create a configuration file, called metalsmith.json which contains all the configuration options for Metalsmith and identifies the plugins, the order in which they run, and any additional plugin configuration.

If using the CLI approach, you no longer need our index.js file in your project. Instead, you need to create a metalsmith.json file to provide the same information to Metalsmith. In our example, here’s what it would look like:

metalsmith.json

{
    "plugins": [
        { "@metalsmith/markdown": {} },
        { "@metalsmith/layouts": {} }
    ]
}

Note that we don’t have to set up our requirements or use .build(). For our simple example, we just tell Metalsmith to use @metalsmith/markdown and then run @metalsmith/layouts with our configuration options. With this one-time setup, we can run Metalsmith at any time from the command line using the metalsmith command.

If you’d like to use the local copy we’ve already installed, you can use npx to run the command (npx will execute the corresponding command from node_modules/.bin/).

npx metalsmith

Once that runs, you will get the exact same results in the build directory. In fact, it helps to completely delete the entire build directory, just so you can see and confirm that it ran.

If you’d rather use the simpler, configuration-based CLI approach, you can safely discard index.js. It’s no longer in use and the CLI approach always reads metalsmith.json instead. Similarly, if you prefer the more expressive, code-based API approach, then you can discard metalsmith.json. Either method builds the exact same files in the build directory and you can run it whichever way you’d prefer.

Optionally installing Metalsmith globally

Most often people regularly using the CLI approach will install Metalsmith globally. That means you can use the metalsmith command wherever you’d like and it’ll look for a metalsmith.json file in the current directory and use that. If you would like to install it globally, you can do so with npm. Note that this will remain installed even if you delete the project folder.

npm install -g metalsmith

If installed globally, then running metalsmith in your current directory—or any current directory with its own metalsmith.json file—is a bit simpler:

metalsmith

Wrapping up

If you’ve made it this far, congratulations.

You’ve accomplished everything we’ve set out to do. You have successfully…

Set up your project folder and all the necessary files.
Installed your requirements
Created some source content.
Created a page template.
Created a node script using the Metalsmith API to run your content through the two required steps we identified at the outset.
Run your script in Node and found the results in the build folder.
Created a metalsmith.json file that runs through the exact same Metalsmith plugins and settings.
Run the CLI version of Metalsmith, reading your configuration from metalsmith.json and doing the exact same task.

You’ll find that you can continue to add content, if so desired, to the src/ folder. Each and every source markdown file that you add will create yet another HTML file in the build directory with the same path (aside from having a .html extension instead of .md).

TL;DR

Too long; didn’t read

In the steps described above, we have set up the project and its dependencies in a folder called ‘project’ using the command line:

mkdir project
cd project
npm init -y
npm install --save-dev metalsmith @metalsmith/markdown @metalsmith/layouts jstransformer-handlebars
touch index.js
mkdir layouts
touch layouts/default.hbs
mkdir src
touch src/index.md

We created a single source file, with YAML frontmatter defining some metadata and which template to use, followed by the file’s markdown-formatted content:

src/index.md

---
title: Example
description: This page is just an example.
layout: default.hbs
---

## Lorem ipsum

Dolor sit amet, consectetur __strong__ adipiscing elit. Morbi faucibus, *em* purus at gravida dictum, libero arcu convallis lacus, in commodo libero metus eu nisi. Nullam commodo, neque nec porta placerat, nisi est fermentum augue, [link](https://metalsmith.io) vitae gravida tellus sapien sit amet tellus. Aenean non diam orci. Proin quis elit turpis. Suspendisse non diam ipsum.

### Suspendisse nec ullamcorper odio.

- Vestibulum arcu mi, sodales non suscipit id, ultrices ut massa.
- Sed ac sem sit amet arcu malesuada fermentum.
- Nunc sed.

We made our basic handlebars template to change our HTML fragment into a complete HTML page, with contents as the property Metalsmith uses to store the contents of the source file and our title and description metadata from the source file available as template variables:

layouts/default.hbs

<!doctype html>
<html lang="en">
<head>
    <meta charset="utf-8">
    <title>{{ title }}</title>
    <meta name="description" content="{{ description }}" />
</head>
<body>

    <h1>{{{ title }}}</h1>
    {{{ contents }}}

</body>
</html>

We created the script to configure Metalsmith to assemble our source files using our @metalsmith/markdown and @metalsmith/layouts plugins:

index.js

// Get our requirements, installed by npm
const Metalsmith  = require('metalsmith'),
    markdown    = require('@metalsmith/markdown'),
    layouts     = require('@metalsmith/layouts');

// Run Metalsmith in the current directory.
// When the .build() method runs, this reads
// and strips the frontmatter from each of our
// source files and passes it on to the plugins.
Metalsmith(__dirname)

    // Use @metalsmith/markdown to convert
    // our source files' content from markdown
    // to HTML fragments.
    .use(markdown())

    // Put the HTML fragments from the step above
    // into our template, using the Frontmatter
    // properties as template variables.
    .use(layouts())

    // And tell Metalsmith to fire it all off.
    .build(function(err, files) {
        if (err) { throw err; }
    });

With the script in place, we used Node to run it with a single command:

node index

After doing so, our source file’s content and metadata from src/index.md generated the corresponding html file, found at build/index.html. That’s a working API implementation.

Then, to demonstrate a version using the CLI approach, we created a metalsmith.json file with the same configuration.

metalsmith.json

{
    "plugins": [
        { "@metalsmith/markdown": {} },
        { "@metalsmith/layouts": {} }
    ]
}

And to run the CLI version using metalsmith.json as the configuration, we ran the Metalsmith command already installed by npm, using npx to execute the copy in node_modules/.bin.

npx metalsmith

… Which generates the exact same file in the build directory when you run it. If you prefer the CLI approach, read about installing Metalsmith globally, above, to make your life easier.

Metalsmith logoimage/svg+xmlMetalsmith logoKevin Van LierdeIan Storm Taylor

What we’re going to accomplish

Setup

The files and folders that make up a project

Getting started

The content

Creating HTML fragments using @metalsmith/markdown

src/index.md

The template

Turning HTML fragments and metadata into complete HTML files

layouts/default.hbs

The script

Configuring Metalsmith to use our plugins

index.js

CLI usage

An alternate way to get the same results

metalsmith.json

Optionally installing Metalsmith globally

Wrapping up

If you’ve made it this far, congratulations.

TL;DR

Too long; didn’t read

src/index.md

layouts/default.hbs

index.js

metalsmith.json